|
VGX CAT-5 Extender
VGX brand extenders can drive video over CAT5 cables to
500 feet (150 meters) with little to no degradation of signal quality.
The VGX is a single channel UTP (CAT5) VGA video extender consisting of
a transmitter (VTX-1) and a receiver (VRX-1) sold together as a pair.
The transmitter converts a computer's VGA signal into a format that can
be transmitted using a single inexpensive and commonly available
Category-5 Unshielded Twisted Pair (UTP) cable with RJ45 connectors,
used in most Local Area Networks. At the receiving (remote) end, the
CAT5 signal is converted back to VGA for connection to your monitor,
projector or other display device.
The transmitter and receiver are each housed in a small plastic
enclosure and include an HD15 video connector and RJ45 connector for the
CAT5 cable. Included with the pair of devices is one small power adapter
(can be powered at either end) and a short adapter cable for easy
connection to the standard HD15 computer interface.
Features:
·Drive
signals up to 500 ft. (150 m)
·Amplifies
the signal for clean and crisp transmission
·Differential
signaling eliminates ground loops and noise
·Handles
resolutions up to 1600 x 1200 at any refresh rate
·Rugged,
reliable, compact size
·Only
one end requires power in most applications.
·Power
supply can be connected at the sending or the receiving end for
convenience
·Made
in U.S.A.
Specifications:
·Max.
Distance: Up to 500 ft. (150 m)
·Resolution:
Up to 1600 x 1200 non-interlaced to 85 Hz
·Bandwidth:
DC to 250 MHz
·Connectors:
HD15 female for video in/out; Shielded RJ45
·Interfaces:
Standard Analog VGA; Proprietary CAT5
·Compliance:
CE; meets requirements for FCC Part 15 Subpart B Class A, IC Class
·Power:
From utility-power (mains) outlet, through included external power
adapter.
·Output
voltage: 9v DC regulated Center-Positive.
·Power:
5 Watts (max)
·Size
0.8H x 1.7W x 4.5L (each)
·Weight
2 lbs. (shipping)
► Click here to download our Distribution PDF
|
